SH7137 Datasheet, PDF (42/1160 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 1 Overview
Classification
Symbol
I/O Name
Function
E10A interface
ASEMDO I ASE mode
Sets the ASE mode. When this pin is
driven low, the LSI enters ASE
mode, and when driven high, the LSI
operates in normal mode. Emulator
dedicated functions can be used in
the ASE mode. When nothing is
input to this pin, it is pulled up
internally.
ASEBRK
I
Break request E10A emulator break input
ASEBRKAK O
Break mode
acknowledge
Indicates the E10A emulator has
entered the break mode.
Note: The WDTOVF pin should not be pulled down. If it must be pulled down, use a resistor of 1
MΩ or more.
Rev. 2.00 Sep. 10, 2008 Page 16 of 1130
REJ09B0402-0200