English
Language : 

JG82852GMSL7VP Datasheet, PDF (62/176 Pages) Intel Corporation – Intel® 852GM/852GMV Chipset Intel® 852GM/852GMV Chipset Hub (GMCH)
Register Description
R
3.8.14.
GMC – GMCH Miscellaneous Control Register (Device 0)
Address Offset:
Default Value:
Access:
Size:
50–51h
0000h
Read/Write, Read Only
16 bits
Bit
15:10
9
8
7:1
0
Descriptions
Reserved
Reserved
RRBAR Access Enable—R/W:
1 = Enables the RRBAR space.
0 = Disable
Reserved
MDA Present (MDAP)—R/W:
This bit should not be set when the VGA Enable bit is not set. If the VGA enable bit is set, then
accesses to IO address range x3BCh–x3BFh are forwarded to Hub Interface. If the VGA enable bit is
not set then accesses to IO address range x3BCh–x3BFh are treated just like any other IO accesses.
MDA resources are defined as the following:
Memory: 0B0000h – 0B7FFFh
I/O:
3B4h, 3B5h, 3B8h, 3B9h, 3BAh, 3BFh,
(including ISA address aliases, A[15:10] are not used in decode)
Any I/O reference that includes the I/O locations listed above, or their aliases, will be forwarded to Hub
Interface even if the reference includes I/O locations not listed above.
The following table shows the behavior for all combinations of MDA and VGA:
VGA MDA Behavior
0 0 All References to MDA and VGA go to Hub Interface (Default)
0 1 Reserved
1 0 All References to VGA go to PCI.
MDA-only references (I/O address 3BF and aliases)
will go to Hub Interface.
1 1 VGA References go to PCI; MDA References
go to Hub Interface
62
Intel® 852GM/852GMV Chipset GMCH Datasheet