DS537 Datasheet, PDF (4/148 Pages) Xilinx, Inc – LogiCORE IP XPS LL TEMAC

LogiCORE IP XPS LL TEMAC (v2.03a)
Table 1: PHY Interface Support Based on TEMAC Mode Selected
PHY Interface
Soft TEMAC V4 Hard TEMAC V5 Hard TEMAC V6 Hard TEMAC
MII (10/100 Mbs)
Yes
Yes
Yes
Yes⁽¹⁾
GMII/MII (tri-speed)
Yes
Yes
Yes
Yes(2)
RGMII V1.3 (tri-speed)
No
Yes
Yes
Yes
RGMII V2.0 (tri-speed)
No
No(3)
Yes
Yes
SGMII (tri-speed)
No
Yes
Yes
Yes
1000 Base-X (1000 Mbs)
No
Yes
Yes
Yes
1. Virtex-6 devices support MII at 2.5 V only; Virtex-5, Virtex-4, Spartan-6 and Spartan-3 devices support MII at 3.3 V or lower.
2. Virtex-6 devices support GMII/MII at 2.5 V only; Virtex-5, Virtex-4, Spartan-6 and Spartan-3 devices support GMII/MII at 3.3 V or
lower.
3. Many PHY devices which support RGMII V2.0 will also work with RGMII V1.3 by adjusting some values in the PHY registers and
by adjusting the DELAY primitives for the RGMII signals in the xps_ll_temac.
Table 2: TEMAC Types Support Based on Device Selected
C_FAMILY and C_SUBFAMILY
Soft TEMAC V4 Hard TEMAC
SPARTAN3E
Yes
No
ASPARTAN3E
Yes
No
SPARTAN3A
Yes
No
ASPARTAN3A
Yes
No
SPARTAN3AN
Yes
No
SPARTAN3ADSP
Yes
No
ASPARTAN3ADSP
Yes
No
SPARTAN6
Yes
No
VIRTEX4 and LX
Yes
No
VIRTEX4 and SX
Yes
No
VIRTEX4 and FX
Yes
Yes
QVIRTEX4 and LX
Yes
No
QVIRTEX4 and SX
Yes
No
QVIRTEX4 and FX
Yes
Yes
QRVIRTEX4 and LX
Yes
No
QRVIRTEX4 and SX
Yes
No
QRVIRTEX4 and FX
Yes
Yes
VIRTEX5 and LX
Yes
No
VIRTEX5 and LXT
Yes
No
VIRTEX5 and SXT
Yes
No
VIRTEX5 and FXT
Yes
No
VIRTEX6
Yes
No
V5 Hard TEMAC
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
No
V6 Hard TEMAC
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
www.xilinx.com
4