UPD78F9500MA-CAC-A Datasheet, PDF (317/342 Pages) Renesas Technology Corp – 8-Bit Single-Chip Microcontrollers

APPENDIX A DEVELOPMENT TOOLS
Remarks 1. The QB-78K0SKX1 is supplied with the integrated debugger ID78K0S-QB, a USB interface cable, the
on-chip debug emulator QB-MINI2, and a connection cable.
Download the software for operating the QB-MINI2 from the download site for development tools
(http://www.necel.com/micro/en/ods/) when using the QB-MINI2.
2. The packed contents of QB-78K0SKX1 differ depending on the part number, as follows.
Packed Contents In-Circuit Emulator Emulation Probe Exchange Adapter Target Connector
Part Number
QB-78K0SKX1-ZZZ
QB-78K0SKX1
None
QB-78K0SKX1-T10MA
QB-50-EP-01T
QB-10MA-EA-01T QB-10MA-NQ-01T
A.4.2 When using on-chip debug emulator with programming function QB-MINI2
QB-MINI2
On-chip debug emulator with
programming function
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0S/Kx1+ microcontrollers. It is available also as flash
memory programmer dedicated to microcontrollers with on-chip flash memory. When
using this as on-chip debug emulator, it should be used in combination with a connection
cable and a USB interface cable that is used to connect the host machine.
Target connector specifications
16-pin general-purpose connector (2.54 mm pitch)
Remark Download the software for operating the QB-MINI2 from the download site for development tools
(http://www.necel.com/micro/en/ods/).
A.5 Debugging Tools (Software)
ID78K0S-QB^Note
(supporting
QB-78K0SKX1, QB-MINI2)
Integrated debugger
This debugger supports the in-circuit emulators for the 78K0S/Kx1+ microcontrollers. The
ID78K0S-QB is Windows-based software.
Provided with the debug function supporting C language, source programming, disassemble
display, and memory display are possible.
It should be used in combination with the device file (DF789234).
SM+ for 78K0S
SM+ for 78K0S/Kx1+^Note
System simulator
System simulator is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating the
operation of the target system on a host machine.
Use of system simulator allows the execution of application logical testing and performance testing
on an independent basis from hardware development, thereby providing higher development
efficiency and software quality.
System simulator should be used in combination with the device file (DF789234).
The following two types of system simulators supporting the 78K0S/Kx1+ microcontrollers are
available.
• SM+ for 78K0S (instruction simulation version)
This can only simulate a CPU. It is included in the software package.
• SM+ for 78K0S/Kx1+ (instruction + peripheral simulation version)
This can simulate a CPU and peripheral hardware (ports, timers, serial interfaces, etc.).
Note Download the ID78K0S-QB from the download site for development tools
(http://www.necel.com/micro/en/ods/).
User’s Manual U18172EJ3V0UD
315