UPD78F9500MA-CAC-A Datasheet, PDF (296/342 Pages) Renesas Technology Corp – 8-Bit Single-Chip Microcontrollers

CHAPTER 19 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°C)
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
VDD
−0.3 to +6.5
V
Input voltage
Output voltage
VSS
VI
P20 to P23, P32, P34, P40, P43
VO
−0.3 to +0.3
V
−0.3 to VDD + 0.3^{Note 1}
V
−0.3 to VDD + 0.3^{Note 1}
V
Analog input voltage ^{Note 2} VAN
−0.3 to VDD + 0.3^{Note 1}
V
Output current, high
IOH
Per pin
−10.0
mA
Total of P20 to P23, P32, P40, P43
−44.0
mA
Output current, low
IOL
Per pin
20.0
mA
Total of P20 to P23, P32, P40, P43
44.0
mA
Operating ambient
TA
In normal operation mode
temperature
During flash memory programming
−40 to +85
°C
Storage temperature
Tstg
Flash memory blank status
−65 to +150
°C
Flash memory programming already performed
−40 to +125
°C
Notes 1. Must be 6.5 V or lower
<R>
2. μPD78F920x only
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
294
User’s Manual U18172EJ3V0UD