UPD78F9500MA-CAC-A Datasheet, PDF (256/342 Pages) Renesas Technology Corp – 8-Bit Single-Chip Microcontrollers

CHAPTER 16 FLASH MEMORY
Figure 16-21. Example of Block Blank Check Operation in Self Programming Mode
Block blank check
<1> Set block blank check
command (FLCMD = 04H)
<2> Set no. of block for
blank check to FLAPH
<3> Set FLAPL to 00H
<4> Set the same value as
that of FLAPH to FLAPHC
<5> Set FLAPLC to 00H
<6> Clear PFS
<7> Clear & restart WDT counter
(WDTE = ACH)^Note
<8> Execute HALT instruction
<9> Check execution result
(VCERR and WEPRERR flags)
Normal
<11> Normal termination
Abnormal
<10> Abnormal termination
Note This setting is not required when the watchdog timer is not used.
Remark <1> to <11>in Figure 16-21 correspond to <1> to <11> in 16.8.7 (previous page).
254
User’s Manual U18172EJ3V0UD