English
Language : 

UPD78F9500MA-CAC-A Datasheet, PDF (222/342 Pages) Renesas Technology Corp – 8-Bit Single-Chip Microcontrollers
CHAPTER 15 OPTION BYTE
15.2 Format of Option Byte
Format of option bytes is shown below.
15.2.1 μPD78F920x
Figure 15-3. Format of Option Byte (μPD78F920x) (1/2)
Address: 0080H
7
6
5
4
1
DEFOSTS1 DEFOSTS0
1
3
RMCE
2
OSCSEL1
1
OSCSEL0
0
LIOCP
DEFOSTS1 DEFOSTS0
Oscillation stabilization time on power application or after reset release
0
0
210/fx (102.4 μs)
0
1
212/fx (409.6 μs)
1
0
215/fx (3.27 ms)
1
1
217/fx (13.1 ms)
Caution The setting of this option is valid only when the crystal/ceramic oscillation clock is selected
as the system clock source. No wait time elapses if the high-speed internal oscillation clock
or external clock input is selected as the system clock source.
RMCE
Control of RESET pin
1
RESET pin is used as is.
0
RESET pin is used as input port pin (P34).
Caution Because the option byte is referenced after reset release, if a low level is input to the RESET
pin before the option byte is referenced, then the reset state is not released.
Also, when setting 0 to RMCE, connect the pull-up resistor.
OSCSEL1 OSCSEL0
Selection of system clock source
0
0
Crystal/ceramic oscillation clock
0
1
External clock input
1
×
High-speed internal oscillation clock
Caution Because the X1 and X2 pins are also used as the P23/ANI3 and P22/ANI2 pins, the conditions
under which the X1 and X2 pins can be used differ depending on the selected system clock
source.
(1) Crystal/ceramic oscillation clock is selected
The X1 and X2 pins cannot be used as I/O port pins or analog input pins of A/D converter
because they are used as clock input pins.
(2) External clock input is selected
Because the X1 pin is used as an external clock input pin, P23/ANI3 cannot be used as
an I/O port pin or an analog input pin of A/D converter.
(3) High-speed internal oscillation clock is selected
P23/ANI3 and P22/ANI2 pins can be used as I/O port pins or analog input pins of A/D
converter.
Remark × : don’t care
220
User’s Manual U18172EJ3V0UD