UPD78F9234MC-5A4-A Datasheet, PDF (414/419 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

APPENDIX E REVISION HISTORY
(2/6)
Edition
Description
Applied to:
2nd edition Modification of 13.4.2 Multiple interrupt servicing
Addition of Caution to Example 1 in Figure 13-10 Example of Multiple Interrupts
(1/2)
CHAPTER 13 INTERRUPT
FUNCTIONS
Addition of Example 3 to Figure 13-10 Example of Multiple Interrupts (2/2)
Modification of reset signal in Figure 14-3 HALT Mode Release by Reset Signal
Generation
CHAPTER 14 STANDBY
FUNCTION
Modification of description in and addition of Note to (a) Release by unmasked
interrupt request in (2) of 14.2.2 STOP mode
Modification of reset signal in Figure 14-6 STOP Mode Release by Reset Signal
Generation
Modification of Figure 15-1 Block Diagram of Reset Function
CHAPTER 15 RESET
FUNCTION
Modification of Figure 16-3 Example of Software Processing After Release of
Reset (1/2)
CHAPTER 16 POWER-ON-
CLEAR CIRCUIT
Modification of Figure 17-1 Block Diagram of Low-Voltage Detector
Modification of INTLVI and Note 2 in Figure 17-5 Timing of Low-Voltage Detector
Interrupt Signal Generation
CHAPTER 17 LOW-
VOLTAGE DETECTOR
Modification of (2) in <Action> of 17.5 Cautions for Low-Voltage Detector
Modification of Figure 17-6 Example of Software Processing After Release of
Reset (1/2)
Modification of description and configuration in CHAPTER 18 OPTION BYTE
CHAPTER 18 OPTION
BYTE
Modification of and addition to 19.1 Features
Figure 19-2 Environment for Writing Program to Flash Memory is divided into two
figures, in the case of FlashPro4 and in the case of PG-FPL2
CHAPTER 19 FLASH
MEMORY
Deletion of 19.7.1 Flash memory programming mode
Modification of and addition to 19.8.2 Cautions on self programming function
Addition of <Setting conditions> in 3. Operating conditions of WEPRERR flag of
19.8.3 Registers used for self programming function (3)
Addition of description to Figure 19-15 Format of Flash Programming Command
Register (FLCMD)
Complete revision of CHAPTER 21 ELECTRICAL SPECIFICATIONS (TARGET
VALUES)
CHAPTER 21
ELECTRICAL
SPECIFICATIONS
(TARGET VALUES)
Addition of CHAPTER 25 PACKAGE MARKING INFORMATION and CHAPTER 26 CHAPTER 25 PACKAGE
RECOMMENDED SOLDERING CONDITIONS
MARKING INFORMATION
CHAPTER 26
RECOMMENDED
SOLDERING CONDITIONS
Addition of included software tools to A.1 Software Package
APPENDIX A
DEVELOPMENT TOOLS
Addition of APPENDIX D LIST OF CAUTIONS
APPENDIX D LIST OF
CAUTIONS
412
User’s Manual U17446EJ5V0UD