UPD78F9234MC-5A4-A Datasheet, PDF (413/419 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

APPENDIX E REVISION HISTORY
E.2 Revision History up to Previous Editions
The following table shows the revision history up to this edition. The “Applied to:” column indicates the chapters of
each edition in which the revision was applied.
Edition
Description
Applied to:
(1/6)
2nd edition Addition of part number to 1.3 Ordering Information
CHAPTER 1 OVERVIEW
Modification of operating temperature range in 1.5 78K0S/Kx1+ Product Lineup
Addition of Note to P34/RESET, P121/X1 and P122/X2 in 2.1 Pin Function List
Addition of description to 2.2.3 P30 to P34 (Port 3)
CHAPTER 2 PIN
FUNCTIONS
Addition of description to 2.2.7 RESET
Addition of description to and modification of Cautions in 4.2.3 Port 3
CHAPTER 4 PORT
FUNCTIONS
Modification of description in (2) External event counter in 6.1 Functions of 16-bit
Timer/Event Counter 00
Modification of Caution 2 in Figure 6-2 Format of 16-bit Timer Counter 00 (TM00)
CHAPTER 6 16-BIT
TIMER/EVENT COUNTER
00
Modification of Caution 2 in Figure 6-5 Format of 16-bit Timer Mode Control
Register 00 (TMC00)
Addition of Caution to (1), (2), (3), and (4) in 6.4.3 Pulse width measurement
operations
Modification of Figure 6-19 Configuration Diagram for Pulse Width Measurement
by Free-Running Counter
Modification of Figure 6-20 Timing of Pulse Width Measurement Operation by
Free-Running Counter and One Capture Register (with Both Edges Specified)
and Note
Modification of Figure 6-22 Timing of Pulse Width Measurement Operation with
Free-Running Counter (with Both Edges Specified) and Note
Modification of Figure 6-24 Timing of Pulse Width Measurement Operation by
Free-Running Counter and Two Capture Registers (with Rising Edge Specified)
and Note
Modification of <3> and <4> in (2) 16-bit timer counter 00 (TM00) operation of 6.5
Cautions Related to 16-bit Timer/Event Counter 00
Modification of Caution in (1) 8-bit compare register 80 (CR80) of 7.2
Configuration of 8-bit Timer 80
CHAPTER 7 8-BIT TIMER
80
Modification of description in (2) 8-bit timer H compare register 11 (CMP11) of 8.2
Configuration of 8-bit Timer H1
CHAPTER 8 8-BIT TIMER
H1
Modification of Caution 1 in 8.4.2 Operation as PWM output mode
Modification of (e) Operation by changing CMP11 (CMP11 = 02H → 03H, CMP01 =
A5H) in Figure 8-9 Operation Timing in PWM Output Mode
Addition of description to Caution 2 in Figure 9-2 Format of Watchdog Timer Mode CHAPTER 9 WATCHDOG
Register (WDTM)
TIMER
Modification of Table 10-1 Sampling Time and A/D Conversion Time and Note 1
Modification of Figure 10-3 Format of A/D Converter Mode Register (ADM) and
Note 2
CHAPTER 10 A/D
CONVERTER
Addition of description to (7) Input switch control register (ISC) in 11.3 Registers
Controlling Serial Interface UART6
CHAPTER 11 SERIAL
INTERFACE UART6
Modification of value in Table 11-4 Set Data of Baud Rate Generator
User’s Manual U17446EJ5V0UD
411