M16C30P_07 Datasheet, PDF (222/317 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/30 SERIES

M16C/30P Group
19. Flash Memory Version
19.3.3.6 FMR06 Bit
This is a read-only bit indicating an auto program operation state. The FMR06 bit is set to “1” when a program
error occurs; otherwise, it is set to “0”. Refer to 19.3.8 Full Status Check.
19.3.3.7 FMR07 Bit
This is a read-only bit indicating the auto erase operation status. The FMR07 bit is set to “1” when an erase
error occurs; otherwise, it is set to “0”. For details, refer to 19.3.8 Full Status Check.
19.3.3.8 FMR11 Bit
EW0 mode is entered by setting the FMR11 bit to “0” (EW0 mode).
EW1 mode is entered by setting the FMR11 bit to “1” (EW1 mode).
19.3.3.9 FMR16 Bit
This is a read-only bit indicating the execution result of the read lock bit status command.
When the block, where the read lock bit status command is executed, is locked, the FMR16 bit is set to “0”.
When the block, where the read lock bit status command is executed, is unlocked, the FMR16 bit is set to “1”.
Figure 19.6 shows Setting and Resetting of EW0 Mode. Figure 19.7 show Setting and Resetting of EW1 Mode.
Rev.1.22 Mar 29, 2007 Page 206 of 291
REJ09B0179-0122