PIC18F87K22 Datasheet, PDF (496/548 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Enhanced Flash Microcontrollers with 12-Bit A/D and nanoWatt XLP Technology

PIC18F87K22 FAMILY
31.3 DC Characteristics: PIC18F87K22 Family (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VOL Output Low Voltage
D080
I/O Ports:
PORTA, PORTF, PORTG,
—
0.6
PORTH
PORTB, PORTC, PORTD,
—
0.6
PORTE, PORTJ
D083
VOH
OSC2/CLKO
(EC modes)
Output High Voltage⁽¹⁾
—
0.6
D090
I/O Ports:
PORTA, PORTF, PORTG,
VDD – 0.7
—
PORTH
PORTB, PORTC, PORTD, VDD – 0.7
—
PORTE, PORTJ
D092
OSC2/CLKO
(INTOSC, EC modes)
VDD – 0.7
—
Capacitive Loading Specs
on Output Pins
D100⁽⁴⁾ COSC2 OSC2 Pin
—
20
D101 CIO All I/O Pins and OSC2
—
50
D102 CB
SCLx, SDAx
—
400
Legend: TBD = To Be Determined
Note 1: Negative current is defined as current sourced by the pin.
V IOL = 2 mA, VDD = 3.3V,
-40C to +85C
V IOL = 3.4 mA, VDD = 3.3V,
-40C to +85C
V IOL = 1.6 mA, VDD = 3.3V,
-40C to +85C
V
V IOH = -2 mA, VDD = 3.3V,
-40C to +85C
V IOH = -2 mA, VDD = 3.3V,
-40C to +85C
V IOH = -1 mA, VDD = 3.3V,
-40C to +85C
pF In HS mode when
external clock is used to drive
OSC1
pF To meet the AC Timing
Specifications
pF I²C™ Specification
31.4 DC Characteristics: CTMU Current Source Specifications
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾
Max Units
Conditions
IOUT1 CTMU Current Source,
Base Range
—
550
—
nA CTMUICON<1:0> = 01
IOUT2 CTMU Current Source,
10x Range
—
5.5
—
A CTMUICON<1:0> = 10
IOUT3 CTMU Current Source,
100x Range
—
55
—
A CTMUICON<1:0> = 11
Note 1: Nominal value at center point of current trim range (CTMUICON<7:2> = 000000).
DS39960B-page 496
Preliminary
 2010 Microchip Technology Inc.