PIC18F87K22 Datasheet, PDF (442/548 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Enhanced Flash Microcontrollers with 12-Bit A/D and nanoWatt XLP Technology

PIC18F87K22 FAMILY
BTFSC
Bit Test File, Skip if Clear
Syntax:
BTFSC f, b {,a}
Operands:
Operation:
Status Affected:
Encoding:
Description:
0  f  255
0b7
a [0,1]
skip if (f<b>) = 0
None
1011 bbba ffff ffff
If bit ‘b’ in register ‘f’ is ‘0’, then the next
instruction is skipped. If bit ‘b’ is ‘0’, then
the next instruction fetched during the
current instruction execution is discarded
and a NOP is executed instead, making
this a two-cycle instruction.
If ‘a’ is ‘0’, the Access Bank is selected. If
‘a’ is ‘1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘0’ and the extended instruction set
is enabled, this instruction operates in
Indexed Literal Offset Addressing mode
whenever f 95 (5Fh). See
Section 29.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Decode
Read
register ‘f’
Process
Data
If skip:
Q1
Q2
Q3
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
Q4
No
operation
Q4
No
operation
Q4
No
operation
No
operation
Example:
HERE BTFSC FLAG, 1, 0
FALSE :
TRUE :
Before Instruction
PC
=
After Instruction
If FLAG<1> =
PC
=
If FLAG<1> =
PC
=
address (HERE)
0;
address (TRUE)
1;
address (FALSE)
BTFSS
Bit Test File, Skip if Set
Syntax:
BTFSS f, b {,a}
Operands:
Operation:
Status Affected:
Encoding:
Description:
0  f  255
0b<7
a [0,1]
skip if (f<b>) = 1
None
1010 bbba ffff ffff
If bit ‘b’ in register ‘f’ is ‘1’, then the next
instruction is skipped. If bit ‘b’ is ‘1’, then
the next instruction fetched during the
current instruction execution is discarded
and a NOP is executed instead, making
this a two-cycle instruction.
If ‘a’ is ‘0’, the Access Bank is selected. If
‘a’ is ‘1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates in
Indexed Literal Offset Addressing mode
whenever f 95 (5Fh). See
Section 29.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words:
1
Cycles:
1(2)
Note:
3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Decode
Read
register ‘f’
Process
Data
If skip:
Q1
Q2
Q3
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
Q4
No
operation
Q4
No
operation
Q4
No
operation
No
operation
Example:
HERE
FALSE
TRUE
BTFSS
:
:
FLAG, 1, 0
Before Instruction
PC
=
After Instruction
If FLAG<1> =
PC
=
If FLAG<1> =
PC
=
address (HERE)
0;
address (FALSE)
1;
address (TRUE)
DS39960B-page 442
Preliminary
 2010 Microchip Technology Inc.