PIC18F87K22 Datasheet, PDF (147/548 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Enhanced Flash Microcontrollers with 12-Bit A/D and nanoWatt XLP Technology

PIC18F87K22 FAMILY
REGISTER 11-7: PIR4: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 4
R/W-0
CCP10IF⁽¹⁾
bit 7
R/W-0
CCP9IF⁽¹⁾
R/W-0
CCP8IF
R/W-0
CCP7IF
R/W-0
CCP6IF
R/W-0
CCP5IF
R/W-0
CCP4IF
R/W-0
CCP3IF
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-1
bit 0
CCP<10:4>IF: CCP<10:4> Interrupt Flag bits⁽¹⁾
Capture Mode:
1 = A TMR register capture occurred (bit must be cleared in software)
0 = No TMR register capture occurred
Compare Mode:
1 = A TMR register compare match occurred (must be cleared in software)
0 = No TMR register compare match occurred
PWM Mode:
Not used in PWM mode.
CCP3IF: ECCP3 Interrupt Flag bits
Capture Mode:
1 = A TMR register capture occurred (bit must be cleared in software)
0 = No TMR register capture occurred
Compare Mode:
1 = A TMR register compare match occurred (must be cleared in software)
0 = No TMR register compare match occurred
PWM Mode:
Not used in PWM mode.
Note 1: Unimplemented on devices with a program memory of 32 Kbytes (PIC18FX5K22).
 2010 Microchip Technology Inc.
Preliminary
DS39960B-page 147