HMS30C7110 Datasheet, PDF (149/161 Pages) List of Unclassifed Manufacturers – Multipurpose Network Processor

7:0
0x00 Reserved
HMS30C7110
2.13.1.17. Retry time (Retry)
Table 2.122 Retry time register Bit Definition
Address : 1948_0008
Bits Access Default Description
31:9
0x0 Reserved
8:4 RW 0x0 Access time
This 5-bit field is used for checking the latency of data.
If slave failed to make valid data by the access time, then it enter to
the target abort state.
If this value is zero, then there is no checking for the latency of data.
3:0 RW 0x0 Retry time
This 4-bit field is used for limiting the number of retry. If this value
is zero, then there is no limit for the retry.
7:0
0x00 Reserved
2.13.1.18. Clk select (Csel)
Table 2.123 Clk select register Bit Definition
Address : 1948_000C
Bits Access Default Description
31:1
0x0 Reserved
0
RW 0x0
Divid by 4
This 1-bit field controls the CardBus clock speed.
0 = System clock/2
1 = System clock/4
© 2003 MagnaChip Semiconductor Ltd. All Rights Reserved
149
Version 1.5