GX1 Datasheet, PDF (137/247 Pages) National Semiconductor (TI) – Processor Series Low Power Integrated x86 Solution

Integrated Functions (Continued)
.
Table 4-25. TFT Panel Display Modes¹
Resolution
Simultaneous
Colors
Refresh
Rate
(Hz)
DCLK²
Rate
(MHz))
PCLK³
Rate
(MHz)
Panel Type
Maximum Displayed
Colors⁴
640x480⁵
8-bpp
60
256 colors out of a
palette of 256
16-bpp
60
64 KB colors
5-6-5
800x600⁵
8-bpp
60
256 colors out of a
palette of 256
16-bpp
60
64 KB Colors
5-6-5
1024x768
8-bpp
60
256 colors out of a
palette of 256
16-bpp
60
64 KB colors
5-6-5
50.35
50.35
80.0
80.0
65
25.175
25.175
40.0
40.0
65.0
9-bit
12-bit
18-bit
9-bit
12-bit
18-bit
9-bit
12-bit
18-bit
9-bit
12-bit
18-bit
9-bit/18-I/F
57³ = 185,193
61³ = 226,981
4³ = 262,144
29x57x29 = 47,937
31x61x31 = 58,621
32x64x32 = 65,535
57³ = 185,193
61³ = 226,981
64³ = 262,144
29x57x29 = 47,937
31x61x31 = 58,621
32x64x32 = 65,535
57³ = 185,193
65
65.0
9-bit/18-I/F 29x57x29 = 47,937
1. This list is not meant to be an complete list of all the possible supported TFT display modes.
2. DCLK is the input clock from the Geode I/O companion. In some cases, DCLK is doubled to keep the Geode I/O com-
panion’s PLL in a desired operational range.
3. PCLK is the graphics output clock to the Geode I/O companion.
4. 9-bit and 12-bit panels use FRM and dither to increase displayed colors. (See Section 4.5.5 “Dither and Frame Rate
Modulation” on page 136.)
5. All 640x480 and 800x600 modes can be run in simultaneous display with CRT
Revision 1.0
137
www.national.com