PIC18F6X2X Datasheet, PDF (313/386 Pages) Microchip Technology – 64/80-Pin High Performance, 64-Kbyte Enhanced FLASH Microcontrollers with A/D

PIC18F6X2X/8X2X
RRNCF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Rotate Right f (no carry)
[ label ] RRNCF f [,d [,a]
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f<n>) → dest<n-1>,
(f<0>) → dest<7>
N, Z
0100 00da ffff ffff
The contents of register ‘f’ are
rotated one bit to the right. If ‘d’ is 0,
the result is placed in W. If ‘d’ is 1,
the result is placed back in regis-
ter ‘f’ (default). If ‘a’ is 0, the Access
Bank will be selected, overriding
the BSR value. If ‘a’ is 1, then the
bank will be selected as per the
BSR value (default).
register f
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
Q2
Decode
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example 1:
RRNCF REG, 1, 0
Before Instruction
REG = 1101 0111
After Instruction
REG = 1110 1011
Example 2:
RRNCF REG, 0, 0
Before Instruction
W
REG
=?
= 1101 0111
After Instruction
W
REG
= 1110 1011
= 1101 0111
SETF
Set f
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
[ label ] SETF f [,a]
0 ≤ f ≤ 255
a ∈ [0,1]
FFh → f
None
0110 100a ffff ffff
The contents of the specified regis-
ter are set to FFh. If ‘a’ is 0, the
Access Bank will be selected, over-
riding the BSR value. If ‘a’ is 1, then
the bank will be selected as per the
BSR value (default).
1
1
Q Cycle Activity:
Q1
Q2
Decode
Read
register ‘f’
Q3
Process
Data
Q4
Write
register 'f'
Example:
SETF
Before Instruction
REG
=
After Instruction
REG
=
0x5A
0xFF
REG,1
 2003 Microchip Technology Inc.
Advance Information
DS39612A-page 311