PIC18F6X2X Datasheet, PDF (301/386 Pages) Microchip Technology – 64/80-Pin High Performance, 64-Kbyte Enhanced FLASH Microcontrollers with A/D

PIC18F6X2X/8X2X
INCFSZ
Increment f, skip if 0
Syntax:
[ label ] INCFSZ f [,d [,a]
Operands:
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
Operation:
(f) + 1 → dest,
skip if result = 0
Status Affected: None
Encoding:
0011 11da ffff ffff
Description:
The contents of register ‘f’ are
incremented. If ‘d’ is 0, the result is
placed in W. If ‘d’ is 1, the result is
placed back in register ‘f’ (default).
If the result is 0, the next instruction
which is already fetched is dis-
carded and a NOP is executed
instead, making it a two-cycle
instruction. If ‘a’ is 0, the Access
Bank will be selected, overriding
the BSR value. If ‘a’ = 1, then the
bank will be selected as per the
BSR value (default).
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
Read
register ‘f’
Process
Data
Write to
destination
If skip:
Q1
Q2
Q3
Q4
No
operation
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
No
operation
No
operation
Q2
No
operation
No
operation
Q3
No
operation
No
operation
Q4
No
operation
No
operation
Example:
HERE
NZERO
ZERO
INCFSZ
:
:
CNT, 1, 0
Before Instruction
PC
= Address (HERE)
After Instruction
CNT = CNT + 1
If CNT = 0;
PC = Address (ZERO)
If CNT ≠ 0;
PC = Address (NZERO)
INFSNZ
Increment f, skip if not 0
Syntax:
[ label ] INFSNZ f [,d [,a]
Operands:
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
Operation:
(f) + 1 → dest,
skip if result ≠ 0
Status Affected: None
Encoding:
0100 10da ffff ffff
Description:
The contents of register ‘f’ are
incremented. If ‘d’ is 0, the result is
placed in W. If ‘d’ is 1, the result is
placed back in register ‘f’ (default).
If the result is 0, the next instruction
which is already fetched is dis-
carded and a NOP is executed
instead, making it a two-cycle
instruction. If ‘a’ is 0, the Access
Bank will be selected, overriding
the BSR value. If ‘a’ = 1, then the
bank will be selected as per the
BSR value (default).
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
Read
register ‘f’
Process
Data
Write to
destination
If skip:
Q1
Q2
Q3
Q4
No
operation
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
No
operation
No
operation
Q2
No
operation
No
operation
Q3
No
operation
No
operation
Q4
No
operation
No
operation
Example:
HERE
ZERO
NZERO
INFSNZ REG, 1, 0
Before Instruction
PC
= Address (HERE)
After Instruction
REG = REG + 1
If REG ≠ 0;
PC = Address (NZERO)
If REG = 0;
PC = Address (ZERO)
 2003 Microchip Technology Inc.
Advance Information
DS39612A-page 299