PIC18F6X2X Datasheet, PDF (19/386 Pages) Microchip Technology – 64/80-Pin High Performance, 64-Kbyte Enhanced FLASH Microcontrollers with A/D

PIC18F6X2X/8X2X
TABLE 1-2: PIC18F6X2X/8X2X PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
Pin
PIC18F6X2X PIC18F8X2X ^Type
Buffer
Type
Description
PORTF is a bi-directional I/O port.
RF0/AN5
RF0
AN5
18
24
I/O
ST
Digital I/O.
I
Analog
Analog input 5.
RF1/AN6/C2OUT
RF1
AN6
C2OUT
17
23
I/O
ST
Digital I/O.
I
Analog
Analog input 6.
O
ST
Comparator 2 output.
RF2/AN7/C1OUT
RF2
AN7
C1OUT
16
18
I/O
ST
Digital I/O.
I
Analog
Analog input 7.
O
ST
Comparator 1 output.
RF3/AN8
RF1
AN8
15
17
I/O
ST
Digital I/O.
I
Analog
Analog input 8.
RF4/AN9
RF1
AN9
14
16
I/O
ST
Digital I/O.
I
Analog
Analog input 9.
RF5/AN10/CVREF
RF1
AN10
CVREF
13
15
I/O
ST
Digital I/O.
I
Analog
Analog input 10.
O Analog
Comparator VREF output.
RF6/AN11
RF6
AN11
12
14
I/O
ST
Digital I/O.
I
Analog
Analog input 11.
RF7/SS
RF7
SS
11
13
I/O
ST
Digital I/O.
I
TTL
SPI slave select input.
Legend:
Note 1:
2:
3:
4:
5:
6:
7:
8:
TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
Analog = Analog input
I = Input
O
= Output
P = Power
OD = Open Drain (no P diode to VDD)
Alternate assignment for CCP2/P2A in PIC18F8X2X devices when CCP2MX (CONFIG3H<0>) is not set (all Program
Memory modes except Microcontroller).
Default assignment for CCP2/P2A when CCP2MX is set (all devices).
External memory interface functions are only available on PIC18F8X2X devices.
Default assignment for P1B/P1C/P3B/P3C for PIC18F8X2X devices when ECCPMX (CONFIG3H<1>) is set, and for all
PIC18F6X2X devices.
Alternate assignment for CCP2/P2A in PIC18F8X2X devices when CCP2MX is not set (Microcontroller mode).
PORTH and PORTJ (and their multiplexed functions) are only available on PIC18F8X2X devices.
Alternate assignment for P1B/P1C/P3B/P3C for PIC18F8X2X devices when ECCPMX (CONFIG3H<1>) is not set.
AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for proper operation of
the part in User or ICSP modes. See parameter D001A for details.
 2003 Microchip Technology Inc.
Advance Information
DS39612A-page 17