|
MC9S12KG128_10 Datasheet, PDF (31/606 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers | |||
|
◁ |
Chapter 1 MC9S12KG128 Device Overview (MC9S12KG128V1)
1.2.2.17 PE0 / XIRQ â Port E Input Pin 0
PE0 is a general purpose input pin and the non-maskable interrupt request input that provides a means of
applying asynchronous interrupt requests. This will wake up the MCU from STOP or WAIT mode.
1.2.2.18 PH7 / KWH7 / SS2 â Port H I/O Pin 7
PH7 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as slave select pin SS of the Serial Peripheral Interface 2
(SPI2).
1.2.2.19 PH6 / KWH6 / SCK2 â Port H I/O Pin 6
PH6 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as serial clock pin SCK of the Serial Peripheral
Interface 2 (SPI2).
1.2.2.20 PH5 / KWH5 / MOSI2 â Port H I/O Pin 5
PH5 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as master output (during master mode) or slave input
pin (during slave mode) MOSI of the Serial Peripheral Interface 2 (SPI2).
1.2.2.21 PH4 / KWH4 / MISO2 â Port H I/O Pin 2
PH4 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as master input (during master mode) or slave output
(during slave mode) pin MISO of the Serial Peripheral Interface 2 (SPI2).
1.2.2.22 PH3 / KWH3 / SS1 â Port H I/O Pin 3
PH3 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as slave select pin SS of the Serial Peripheral Interface 1
(SPI1).
1.2.2.23 PH2 / KWH2 / SCK1 â Port H I/O Pin 2
PH2 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as serial clock pin SCK of the Serial Peripheral
Interface 1 (SPI1).
1.2.2.24 PH1 / KWH1 / MOSI1 â Port H I/O Pin 1
PH1 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as master output (during master mode) or slave input
pin (during slave mode) MOSI of the Serial Peripheral Interface 1 (SPI1).
MC9S12KG128 Data Sheet, Rev. 1.16
Freescale Semiconductor
31
|
▷ |