XRT72L13 Datasheet, PDF (303/370 Pages) Exar Corporation – M13 MULTIPLEXER/CLEAR CHANNEL DS3 FRAMER IC

áç
PRELIMINARY
XRT72L13
M13 MULTIPLEXER/CLEAR CHANNEL DS3 FRAMER IC
REV. P1.0.6
II/O CONTROL REGISTER (ADDRESS = 0X01)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT2
BIT 1
BIT 0
Disable
TxLOC
LOC
Disable
RxLOC
AMI/
ZeroSup*
Unipolar/
Bipolar*
TxLine CLK RxLine CLK
Invert
Invert
Reframe
R/W
RO
R/W
R/W
R/W
R/W
R/W
R/W
1
0
1
0
0
0
0
0
Table 30 depicts the relationship between the value
of this bit-field to the sampling clock edge of RxLi-
neClk.
TABLE 30: THE RELATIONSHIP BETWEEN THE CONTENTS OF BIT 1 (RXLINECLK INV) OF THE I/O CONTROL
REGISTER, AND THE SAMPLING EDGE OF THE RXLINECLK SIGNAL
RXCLKINV
(BIT 1)
RESULT
0
Rising Edge:
RxPOS and RxNEG are sampled at the rising edge of RxLineClk. See Figure 97 for timing relationship
between RxLineClk, RxPOS, and RxNEG.
1
Falling Edge:
RxPOS and RxNEG are sampled at the falling edge of RxLineClk. See Figure 98 for timing relationship
between RxLineClk, RxPOS, and RxNEG.
Figure 97 and Figure 98 present the Waveform and
Timing Relationships between RxLineClk, RxPOS
and RxNEG for each of these configurations.
FIGURE 97. WAVEFORM/TIMING RELATIONSHIP BETWEEN RXLINECLK, RXPOS AND RXNEG - WHEN RXPOS AND
RXNEG ARE TO BE SAMPLED ON THE RISING EDGE OF RXLINECLK
t42
RxLineClk
t38
t39
RxPOS
RxNEG
291