C8051F54X_14 Datasheet, PDF (69/275 Pages) Silicon Laboratories – Mixed Signal ISP Flash MCU Family

C8051F54x
8.1. Comparator Multiplexer
C8051F54x devices include an analog input multiplexer for each of the comparators to connect Port I/O
pins to the comparator inputs. The Comparator0 inputs are selected in the CPT0MX register (SFR Defini-
tion 8.5). The CMX0P3–CMX0P0 bits select the Comparator0 positive input; the CMX0N3–CMX0N0 bits
select the Comparator0 negative input. Similarly, the Comparator1 inputs are selected in the CPT1MX reg-
ister using the CMX1P3-CMX1P0 bits and CMX1N3-CMX1N0 bits. The same pins are available to both
multiplexers at the same time and can be used by both comparators simultaneously.
Important Note About Comparator Inputs: The Port pins selected as comparator inputs should be con-
figured as analog inputs in their associated Port configuration register, and configured to be skipped by the
Crossbar (for details on Port configuration, see Section “18.6. Special Function Registers for Accessing
and Configuring Port I/O” on page 161).
CMXnN3
CMXnN2
CMXnN1
CMXnN0
CMXnP3
CMXnP2
CMXnP1
CMXnP0
P0.1
P0.3
P0.5
P0.7
P1.1
P1.3
P1.5
P1.7
P2.1
P2.3
P2.5
P2.7
P0.0
P0.2
P0.4
P0.6
P1.0
P1.2
P1.4
P1.6
P2.0
P2.2
P2.4
P2.6
CPn +
VDD
+
-
GND
CPn -
Figure 8.3. Comparator Input Multiplexer Block Diagram
Rev. 1.1
69