|
MC9S12P128 Datasheet, PDF (531/564 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers | |||
|
◁ |
Ordering Information
Appendix B
Ordering Information
The following ï¬gure provides an ordering partnumber example for the devices covered by this data book.
There are two options when ordering a device. Customers must choose between ordering either the mask-
speciï¬c partnumber or the generic / mask-independent partnumber. Ordering the mask-speciï¬c
partnumber enables the customer to specify which particular maskset they will receive whereas ordering
the generic maskset means that FSL will ship the currently preferred maskset (which may change over
time).
In either case, the marking on the device will always show the generic / mask-independent partnumber and
the mask set number.
NOTE
The mask identiï¬er sufï¬x and the Tape & Reel sufï¬x are always both omitted from the
partnumber which is actually marked on the device.
For speciï¬c partnumbers to order, please contact your local sales ofï¬ce. The below ï¬gure illustrates the
structure of a typical mask-speciï¬c ordering number for the MC9S12P-Family devices
S 9 S12 P128 J0 M FT R
Tape & Reel:
R = Tape & Reel
No R = No Tape & Reel
Package Option:
FT = 48 QFN
LH = 64 LQFP
QK = 80 QFP
Temperature Option:
C = -40ËC to 85ËC
V = -40ËC to 105ËC
M = -40ËC to 125ËC
Maskset identifier Suffix:
First digit usually references wafer fab
Second digit usually differentiates mask rev
(This suffix is omitted in generic partnumbers)
Device Title
Controller Family
Main Memory Type:
9 = Flash
3 = ROM (if available)
Status / Partnumber type:
S or SC = Maskset specific partnumber
MC = Generic / mask-independent partnumber
P or PC = prototype status (pre qualification)
S12P-Family Reference Manual, Rev. 1.12
Freescale Semiconductor
531
|
▷ |