TLK3134_1 Datasheet, PDF (88/150 Pages) Texas Instruments – 4-Channel Multi-Rate Transceiver

TLK3134
4-Channel Multi-Rate Transceiver
SLLS838D – MAY 2007 – REVISED JULY 2008
www.ti.com
BIT(s)
4/5.37897.5:0
ADDRESS: 0x9409
NAME
Delay_status[5:0]
Table 2-156. TX1_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37898.5:0
ADDRESS: 0x940A
NAME
Delay_status[5:0]
Table 2-157. TX2_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37899.5:0
ADDRESS: 0x940B
NAME
Delay_status[5:0]
Table 2-158. TX3_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37900.5:0
ADDRESS: 0x940C
NAME
Delay_status[5:0]
Table 2-159. RX0_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37901.5:0
ADDRESS: 0x940D
NAME
Delay_status[5:0]
Table 2-160. RX1_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37902.5:0
ADDRESS: 0x940E
NAME
Delay_status[5:0]
Table 2-161. RX2_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.37903.5:0
ADDRESS: 0x940F
NAME
Delay_status[5:0]
Table 2-162. RX3_DLL_STATUS
For TI use only.
DEFAULT: 0x0000
DESCRIPTION
BIT(s)
4/5.38144.7:0
Table 2-163. CH0_TESTFAIL_ERR_COUNTER
ADDRESS: 0x9500
NAME
Ch0_Testfail error
counter[7:0]
DEFAULT: 0x00FD
DESCRIPTION
This counter reflects error count during PRBS test. Counter increments
for each received character that has an error. Counter clears upon read.
When ST = 0, counter value is valid when PRBS_EN pin is set or when
SERDES RX test pattern registers bits are set
When ST = 1, counter value is valid only when SERDES RX test pattern
verification bits are set
ACCESS
RO
ACCESS
RO
ACCESS
RO
ACCESS
RO
ACCESS
RO
ACCESS
RO
ACCESS
RO
ACCESS
COR
88
Detailed Description
Submit Documentation Feedback