TLK3134_1 Datasheet, PDF (112/150 Pages) Texas Instruments – 4-Channel Multi-Rate Transceiver

TLK3134
4-Channel Multi-Rate Transceiver
SLLS838D – MAY 2007 – REVISED JULY 2008
4 Electrical Specifications
www.ti.com
4.1 ABSOLUTE MAXIMUM RATINGS⁽¹⁾⁽²⁾
over operating free-air temperature range (unless otherwise noted)
Supply voltage
AVDD, DVDD, VDDT, VDDD, VDDA_VCO, VDD_PLL, VDDA_CP, VDD_CML, VREF1/2
Supply voltage
VDDQ, VDDR
Supply voltage
VDDO, VDDM
Input Voltage (LVCMOS)
VI
Input Voltage (HSTL CLASS 1)
VI
Storage temperature
Electrostatic Discharge
Characterized free-air operating temperature range
UNIT
–0.3 to 1.5 V
–0.3 to 2.0 V
–0.3 to 3.0 V
–0.3 to Supply + 0.3 V
–0.3 to 2.0 V
–65°C to 150°C
HBM: 1.5KV, CDM:500V
–40°C to 85°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
4.2 RECOMMENDED OPERATING CONDITIONS
DVDD
Core supply voltage
AVDD
Analog supply voltage
VDDQ
Parallel HSTL I/O supply
voltage
1.5 V Application
1.8 V Application
VDDO
LVCMOS I/O supply voltage
VDDM
MDIO CMOS I/O supply
voltage
1.2 V Application
2.5 V Application
VREF1/2
HSTL reference voltage
1.5 V Application
1.8 V Application
AVDD, VDDD, VDDT
Supply current
3.75 Gbps
DVDD
Supply current
3.75 Gbps
VDDR
Supply current
3.75 Gbps
VDDQ
Supply current (1.6 V)
Supply current (1.9 V)
3.75 Gbps
3.75 Gbps
VDDO
Supply current
3.75 Gbps
VDDA_VCO, VDD_PLL,
VDD_CML, VDDA_CP
Supply current
3.75 Gbps
PD
AVDD, VDDD, VDDT
DVDD
VDDR
VDDQ
VDDO
Total power consumption
Shutdown current (1.26V)
Shutdown current (1.26V)
Shutdown current (1.9V)
Shutdown current (1.9V)
Shutdown current (2.63V)
See Figure 4-18
ENABLE low⁽¹⁾
ENABLE low⁽¹⁾, HSTL powerdown
ENABLE low⁽¹⁾, HSTL active
ENABLE low⁽¹⁾
ENABLE low⁽¹⁾, HSTL powerdown
ENABLE low⁽¹⁾, HSTL active
ENABLE low⁽¹⁾
VDDA_VCO, VDD_PLL,
VDD_CML, VDDA_CP
Shutdown current (1.26V)
ENABLE low⁽¹⁾
(1) Toggle RST_N before setting ENABLE low for proper shutdown.
MIN NOM
1.14 1.2
1.14 1.2
1.4 1.5
1.7 1.8
2.37 2.5
1.14 1.2
2.37 2.5
0.65 0.75
0.85 0.9
MAX
1.26
1.26
1.6
1.9
2.63
1.26
2.63
0.85
0.95
440
290
25
520
640
30
UNIT
V
V
V
V
V
V
mA
mA
mA
mA
mA
100 mA
W
40 mA
30
mA
130
1 mA
10
mA
230
10 mA
1 mA
112 Electrical Specifications
Submit Documentation Feedback