English
Language : 

MC68HC908GT16 Datasheet, PDF (403/412 Pages) Motorola, Inc – Microcontrollers
Electrical Specifications
Timer Interface Module Characteristics
23.19 Timer Interface Module Characteristics
Characteristic
Input capture pulse width
Symbol
Min
tTIH, tTIL
1
Max
—
Unit
tCYC
23.20 Memory Characteristics
Characteristic
RAM data retention voltage
FLASH program bus clock frequency
Symbol
Min
Typ
Max
Unit
VRDR
1.3
—
—
V
—
1
—
—
MHz
FLASH read bus clock frequency
FLASH page erase time
FLASH mass erase time
FLASH PGM/ERASE to HVEN set up time
FLASH high-voltage hold time
FLASH high-voltage hold time (mass erase)
FLASH program hold time
FLASH program time
FLASH return to read time
FLASH cumulative program HV period
FLASH row erase endurance(6)
fRead(1)
tErase(2)
tMErase(3)
tnvs
tnvh
tnvhl
tpgs
tPROG
trcv(4)
tHV(5)
—
8k
1
4
10
5
100
5
30
1
—
10 k
—
—
—
—
—
—
—
—
—
—
100k
8M
Hz
—
ms
—
ms
—
µs
—
µs
—
µs
—
µs
40
µs
—
µs
4
ms
—
Cycles
FLASH row program endurance(7)
—
10 k
100k
—
Cycles
FLASH data retention time(8)
—
10
20
—
Years
1. fRead is defined as the frequency range for which the FLASH memory can be read.
2. If the page erase time is longer than tErase (Min), there is no erase-disturb, but it reduces the endurance of the
FLASH memory.
3. If the mass erase time is longer than tMErase (Min), there is no erase-disturb, but it reduces the endurance of the
FLASH memory.
4. trcv is defined as the time it needs before the FLASH can be read after turning off the high voltage charge pump,
by clearing HVEN to logic 0.
5. tHV is defined as the cumulative high voltage programming time to the same row before next erase.
tHV must satisfy this condition: tnvs + tnvh + tpgs + (tPROG × 64) ≤ tHV max.
6. The minimum row endurance value specifies each row of the FLASH memory is guaranteed to work for at least
this many erase / program cycles.
7. The minimum row endurance value specifies each row of the FLASH memory is guaranteed to work for at least
this many erase / program cycles.
8. The FLASH is guaranteed to retain data over the entire operating temperature range for at least the minimum
time specified.
MC68HC908GT16 • MC68HC908GT8 — Rev. 2
MOTOROLA
Electrical Specifications
Technical Data
403