MC68HC908GT16 Datasheet, PDF (230/412 Pages) Motorola, Inc – Microcontrollers

Input/Output (I/O) Ports
16.3.2 Data Direction Register A
Data direction register A (DDRA) determines whether each port A pin is
an input or an output. Writing a logic 1 to a DDRA bit enables the output
buffer for the corresponding port A pin; a logic 0 disables the output
buffer.
Address: $0004
Bit 7
6
5
4
3
2
1
Read:
DDRA7
Write:
DDRA6
DDRA5
DDRA4
DDRA3
DDRA2
DDRA1
Reset: 0
0
0
0
0
0
0
Figure 16-3. Data Direction Register A (DDRA)
Bit 0
DDRA0
0
DDRA7–DDRA0 — Data Direction Register A Bits
These read/write bits control port A data direction. Reset clears
DDRA7–DDRA0, configuring all port A pins as inputs.
1 = Corresponding port A pin configured as output
0 = Corresponding port A pin configured as input
NOTE: Avoid glitches on port A pins by writing to the port A data register before
changing data direction register A bits from 0 to 1.
Figure 16-4 shows the port A I/O logic.
Technical Data
230
MC68HC908GT16 • MC68HC908GT8 — Rev. 2
Input/Output (I/O) Ports
MOTOROLA