MC68HC908GT16 Datasheet, PDF (35/412 Pages) Motorola, Inc – Microcontrollers

General Description
Features
• On-chip programming firmware for use with host personal
computer which does not require high voltage for entry
• In-system programming (ISP)
• System protection features:
– Optional computer operating properly (COP) reset
– Low-voltage detection with optional reset and selectable trip
points for 3.0-V and 5.0-V operation
– Illegal opcode detection with reset
– Illegal address detection with reset
• Low-power design; fully static with stop and wait modes
• Standard low-power modes of operation:
– Wait mode
– Stop mode
• Master reset pin and power-on reset (POR)
• 16 Kbytes of on-chip 100k cycle write/erase capable FLASH
memory (8 Kbytes on MC68HC908GT8)
• 512 bytes of on-chip random-access memory (RAM)
• 720 bytes of flash programming routines ROM
• Serial peripheral interface module (SPI)
• Serial communications interface module (SCI)
• Two 16-bit, 2-channel timer interface modules (TIM1 and TIM2)
with selectable input capture, output compare, and pulse-width
modulation (PWM) capability on each channel
• 8-channel, 8-bit successive approximation analog-to-digital
converter (ADC)
• BREAK module (BRK) to allow single breakpoint setting during
in-circuit debugging
• Internal pullups on IRQ and RST to reduce customer system cost
MC68HC908GT16 • MC68HC908GT8 — Rev. 2
MOTOROLA
General Description
Technical Data
35