|
MC68HC908GT16 Datasheet, PDF (202/412 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
Keyboard Interrupt Module (KBI)
ACKK â Keyboard Acknowledge Bit
Writing a logic 1 to this write-only bit clears the keyboard interrupt
request. ACKK always reads as logic 0. Reset clears ACKK.
IMASKK â Keyboard Interrupt Mask Bit
Writing a logic 1 to this read/write bit prevents the output of the
keyboard interrupt mask from generating interrupt requests. Reset
clears the IMASKK bit.
1 = Keyboard interrupt requests masked
0 = Keyboard interrupt requests not masked
MODEK â Keyboard Triggering Sensitivity Bit
This read/write bit controls the triggering sensitivity of the keyboard
interrupt pins. Reset clears MODEK.
1 = Keyboard interrupt requests on falling edges and low levels
0 = Keyboard interrupt requests on falling edges only
13.8.2 Keyboard Interrupt Enable Register
The keyboard interrupt enable register enables or disables each port A
pin to operate as a keyboard interrupt pin.
Address: $001B
Bit 7
6
5
4
3
2
1
Bit 0
Read:
KBIE7
Write:
KBIE6
KBIE5
KBIE4
KBIE3
KBIE2
KBIE1
KBIE0
Reset: 0
0
0
0
0
0
0
0
Figure 13-4. Keyboard Interrupt Enable Register (INTKBIER)
KBIE7âKBIE0 â Keyboard Interrupt Enable Bits
Each of these read/write bits enables the corresponding keyboard
interrupt pin to latch interrupt requests. Reset clears the keyboard
interrupt enable register.
1 = PTAx pin enabled as keyboard interrupt pin
0 = PTAx pin not enabled as keyboard interrupt pin
Technical Data
202
MC68HC908GT16 ⢠MC68HC908GT8 â Rev. 2
Keyboard Interrupt Module (KBI)
MOTOROLA
|
▷ |