MC68HC908AS32A Datasheet, PDF (193/280 Pages) Freescale Semiconductor, Inc – Microcontrollers

Reset and System Initialization
15.3.2 Active Resets from Internal Sources
All internal reset sources actively pull the RST pin low for 32 CGMXCLK cycles to allow resetting of
external peripherals. The internal reset signal IRST continues to be asserted for an additional 32 cycles
(see Figure 15-5). An internal reset can be caused by an illegal address, illegal opcode, COP timeout,
LVI, or POR (see Figure 15-6). Note that for LVI or POR resets, the SIM cycles through 4096 CGMXCLK
cycles during which the SIM forces the RST pin low. The internal reset signal then follows the sequence
from the falling edge of RST shown in Figure 15-5.
The COP reset is asynchronous to the bus clock.
The active reset feature allows the part to issue a reset to peripherals and other chips within a system
built around the MCU.
IRST
RST
CGMXCLK
IAB
RST PULLED LOW BY MCU
32 CYCLES
32 CYCLES
Figure 15-5. Internal Reset Timing
VECTOR HIGH
ILLEGAL ADDRESS RST
ILLEGAL OPCODE RST
COPRST
LVI
POR
INTERNAL RESET
Figure 15-6. Sources of Internal Reset
Table 15-2. Reset Recovery Timing
Reset Recovery Type
POR/LVI
All others
Actual Number of Cycles
4163 (4096 + 64 + 3)
67 (64 + 3)
MC68HC908AS32A Data Sheet, Rev. 2.0
Freescale Semiconductor
193