PIC18F47J53 Datasheet, PDF (81/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
6.0 MEMORY ORGANIZATION
There are two types of memory in PIC18 Flash
microcontrollers:
• Program Memory
• Data RAM
As Harvard architecture devices, the data and program
memories use separate busses; this allows for
concurrent access of the two memory spaces.
Section 7.0 “Flash Program Memory” provides
additional information on the operation of the Flash
program memory.
6.1 Program Memory Organization
PIC18 microcontrollers implement a 21-bit program
counter, which is capable of addressing a 2-Mbyte
program memory space. Accessing a location between
the upper boundary of the physically implemented
memory and the 2-Mbyte address returns all ‘0’s (a
NOP instruction).
The PIC18F47J53 family offers a range of on-chip
Flash program memory sizes, from 64 Kbytes (up to
32,768 single-word instructions) to 128 Kbytes
(65,536 single-word instructions).
Figure 6-1 provides the program memory maps for
individual family devices.
FIGURE 6-1:
MEMORY MAPS FOR PIC18F47J53 FAMILY DEVICES
CALL, CALLW, RCALL,
PC<20:0>
21
RETURN, RETFIE, RETLW,
ADDULNK, SUBULNK
Stack Level 1

Stack Level 31
PIC18FX6J53
On-Chip
Memory
Config. Words
PIC18FX7J53
On-Chip
Memory
000000h
00FFFFh
Config. Words _01FFFFh
Unimplemented
Read as ‘0’
Unimplemented
Read as ‘0’
Note:
1FFFFFF
Sizes of memory areas are not to scale. Sizes of program memory areas are enhanced to show detail.
 2010 Microchip Technology Inc.
Preliminary
DS39964B-page 81