PIC18F47J53 Datasheet, PDF (179/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
11.0 PARALLEL MASTER PORT
(PMP)
The Parallel Master Port module (PMP) is an 8-bit
parallel I/O module, specifically designed to communi-
cate with a wide variety of parallel devices, such as
communication peripherals, LCDs, external memory
devices and microcontrollers. Because the interface to
parallel peripherals varies significantly, the PMP is
highly configurable. The PMP module can be
configured to serve as either a PMP or as a Parallel
Slave Port (PSP).
Note:
The PMP module is not implemented on
28-pin devices. It is available only
on the PIC18F46J53, PIC18F47J53,
PIC18LF46J53 and PIC18LF47J53.
FIGURE 11-1:
PMP MODULE OVERVIEW
PIC18
Parallel Master Port
PMA<0>
PMALL
PMA<1>
PMALH
PMA<7:2>
PMCSx
Key features of the PMP module are:
• Up to 16 bits of addressing when using
data/address multiplexing
• Up to 8 Programmable Address Lines
• One Chip Select Line
• Programmable Strobe Options:
- Individual Read and Write Strobes or;
- Read/Write Strobe with Enable Strobe
• Address Auto-Increment/Auto-Decrement
• Programmable Address/Data Multiplexing
• Programmable Polarity on Control Signals
• Legacy Parallel Slave Port Support
• Enhanced Parallel Slave Support:
- Address Support
- 4-Byte Deep, Auto-Incrementing Buffer
• Programmable Wait States
• Selectable Input Voltage Levels
Address Bus
Data Bus
Control Lines
Up to 8-Bit Address
EEPROM
PMBE
PMRD
PMRD/PMWR
PMWR
PMENB
PMD<7:0>
PMA<7:0>
PMA<15:8>
Microcontroller
LCD
8-Bit Data
FIFO
Buffer
 2010 Microchip Technology Inc.
Preliminary
DS39964B-page 179