PIC18F47J53 Datasheet, PDF (528/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
31.3 DC Characteristics:PIC18F47J53 Family (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VOL Output Low Voltage
D080
I/O Ports:
PORTA (except RA6),
PORTD⁽³⁾, PORTE⁽³⁾
—
0.4
V IOL = 4 mA, VDD = 3.3V,
-40C to +85C
PORTB, PORTC, RA6
—
0.4
V IOL = 8.5 mA, VDD = 3.3V,
-40C to +85C
VOH Output High Voltage
D090
I/O Ports:
V
PORTA (except RA6),
PORTD⁽³⁾, PORTE⁽³⁾
2.4
—
V IOH = -3 mA, VDD = 3.3V,
-40C to +85C
PORTB, PORTC, RA6
2.4
—
V IOH = -6 mA, VDD = 3.3V,
-40C to +85C
Capacitive Loading Specs
on Output Pins
D101 CIO
D102 CB
All I/O Pins and OSC2
SCLx, SDAx
—
50
pF To meet the AC Timing
Specifications
—
400
pF I²C™ Specification
Note 1:
2:
3:
4:
5:
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
Negative current is defined as current sourced by the pin.
Only available in 44-pin devices.
When used as general purpose inputs, the RC4 and RC5 thresholds are referenced to VUSB instead of VDD.
Refer to Table 10-2 for pin tolerance levels.
DS39964B-page 528
Preliminary
 2010 Microchip Technology Inc.