PIC18F47J53 Datasheet, PDF (530/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
TABLE 31-4: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions: -40°C < TA < +85°C (unless otherwise stated)
Param
No.
Sym
Characteristics
Min Typ Max Units
Comments
VRGOUT Regulator Output Voltage
2.35 2.5 2.7
V Regulator enabled, VDD = 3.0V
CEFC
External Filter Capacitor
Value⁽¹⁾
5.4
10
18
F ESR < 3 recommended
ESR < 5 required
Note 1: CEFC applies for PIC18F devices in the family. For PIC18LF devices in the family, there is no specific
minimum or maximum capacitance for VDDCORE, although proper supply rail bypassing should still be
used.
TABLE 31-5: ULPWU SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
D100 IULP Ultra Low-Power Wake-up Current —
60
—
nA Net of I/O leakage and current
sink at 1.6V on pin,
VDD = 3.3V
See Application Note AN879,
“Using the Microchip Ultra
Low-Power Wake-up Module”
(DS00879)
† Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
TABLE 31-6: CTMU CURRENT SOURCE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾
Max
Units
Conditions
IOUT1 CTMU Current Source, Base Range
—
550
—
nA
IOUT2 CTMU Current Source, 10x Range
—
5.5
—
A
IOUT3 CTMU Current Source, 100x Range
—
55
—
A
Note 1: Nominal value at center point of current trim range (CTMUICON<7:2> = 000000).
CTMUICON<1:0> = 01
CTMUICON<1:0> = 10
CTMUICON<1:0> = 11
DS39964B-page 530
Preliminary
 2010 Microchip Technology Inc.