PIC18F47J53 Datasheet, PDF (74/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
IPR1
PIR1
PIC18F2XJ53 PIC18F4XJ53
PIC18F2XJ53 PIC18F4XJ53
1111 1111
0000 0000
1111 1111
0000 0000
uuuu uuuu
uuuu uuuu⁽³⁾
PIE1
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
RCSTA2
PIC18F2XJ53 PIC18F4XJ53
0000 000x
0000 000x
uuuu uuuu
OSCTUNE
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
T1GCON
PIC18F2XJ53 PIC18F4XJ53
0000 0x00
0000 0x00
uuuu uuuu
T3GCON
TRISE⁽⁵⁾
TRISD⁽⁵⁾
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
0000 0x00
00-- -111
1111 1111
uuuu uxuu
uu-- -111
1111 1111
uuuu uxuu
uu-- -uuu
uuuu uuuu
TRISC
PIC18F2XJ53 PIC18F4XJ53
11-- -111
11-- -111
uu-- -uuu
TRISB
PIC18F2XJ53 PIC18F4XJ53
1111 1111
1111 1111
uuuu uuuu
TRISA
LATE⁽⁵⁾
LATD⁽⁵⁾
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
111- 1111
---- -xxx
xxxx xxxx
111- 1111
---- -uuu
uuuu uuuu
uuu- uuuu
---- -uuu
uuuu uuuu
LATC
PIC18F2XJ53 PIC18F4XJ53
xx-- -xxx
uu-- -uuu
uu-- -uuu
LATB
PIC18F2XJ53 PIC18F4XJ53
xxxx xxxx
uuuu uuuu
uuuu uuuu
LATA
PIC18F2XJ53 PIC18F4XJ53
xxx- xxxx
uuu- uuuu
uuu- uuuu
DMACON1
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
OSCCON2
PIC18F2XJ53 PIC18F4XJ53
-0-1 01--
—
—
DMACON2
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
HLVDCON
PORTE⁽⁵⁾
PORTD⁽⁵⁾
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
0000 0000
---- -xxx
xxxx xxxx
0000 0000
---- -uuu
uuuu uuuu
uuuu uuuu
---- -uuu
uuuu uuuu
PORTC
PIC18F2XJ53 PIC18F4XJ53
xxxx -xxx
uuuu -uuu
uuuu -uuu
PORTB
PIC18F2XJ53 PIC18F4XJ53
xxxx xxxx
uuuu uuuu
uuuu uuuu
PORTA
PIC18F2XJ53 PIC18F4XJ53
xxx- xxxx
uuu- uuuu
uuu- uuuu
SPBRGH1
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
BAUDCON1 PIC18F2XJ53 PIC18F4XJ53
0100 0-00
0100 0-00
uuuu u-uu
SPBRGH2
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
BAUDCON2 PIC18F2XJ53 PIC18F4XJ53
0100 0-00
0100 0-00
uuuu u-uu
Legend:
Note 1:
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.
5: Not implemented for PIC18F2XJ53 devices.
6: Not implemented for “LF” devices.
DS39964B-page 74
Preliminary
 2010 Microchip Technology Inc.