PIC18F47J53 Datasheet, PDF (370/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
REGISTER 22-3: CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
U-1
—
bit 7
U-1
U-1
U-1
R/WO-1
U-0
R/WO-1
R/WO-1
—
—
—
MSSPMSK
—
ADCSEL IOL1WAY
bit 0
Legend:
R = Readable bit
-n = Value at POR
WO = Write-Once bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Program the corresponding Flash Configuration bit to ‘1’
MSSPMSK: MSSP 7-Bit Address Masking Mode Enable bit
1 = 7-Bit Address Masking mode enabled
0 = 5-Bit Address Masking mode enabled
Unimplemented: Read as ‘0’
ADCSEL: A/D Converter Mode bit
1 = 10-Bit Conversion mode enabled
0 = 12-Bit Conversion mode enabled
IOL1WAY: IOLOCK One Way Set Enable bit
1 = IOLOCK bit (PPSCON<0>) can be set once, provided the unlock sequence has been completed.
Once set, the Peripheral Pin Select registers cannot be written to a second time.
0 = IOLOCK bit (PPSCON<0>) can be set and cleared as needed, provided the unlock sequence has
been completed
DS39964B-page 370
Preliminary
 2010 Microchip Technology Inc.