English
Language : 

PIC18F47J53 Datasheet, PDF (76/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology
PIC18F47J53 FAMILY
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
PMCONL
PIC18F2XJ53 PIC18F4XJ53
000- 0000
000- 0000
uuu- uuuu
PMMODEH PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMMODEL
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMDOUT2H PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMDOUT2L PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMDIN2H
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMDIN2L
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMEH
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMEL
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
PMSTATH
PIC18F2XJ53 PIC18F4XJ53
00-- 0000
00-- 0000
uu-- uuuu
PMSTATL
PIC18F2XJ53 PIC18F4XJ53
10-- 1111
10-- 1111
uu-- uuuu
CVRCON
PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
CCPTMRS0 PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
CCPTMRS1 PIC18F2XJ53 PIC18F4XJ53
0000 0000
0000 0000
uuuu uuuu
CCPTMRS2
DSGPR1(6)
DSGPR0(6)
DSCONH(6)
DSCONL(6)
DSWAKEH(6)
DSWAKEL(6)
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F2XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
PIC18F4XJ53
0000 0000
uuuu uuuu
uuuu uuuu
0--- --00
---- -000
---- ---q
q-qq qq-q
0000 0000
uuuu uuuu
uuuu uuuu
0--- --00
---- -000
---- ---0
0-00 00-0
uuuu uuuu
uuuu uuuu
uuuu uuuu
u--- --uu
---- -uuu
---- ---u
u-uu uu-u
ANCON1
PIC18F2XJ53 PIC18F4XJ53
00-0 0000
uu-u uuuu
uu-u uuuu
ANCON0
PIC18F2XJ53 PIC18F4XJ53
0000 0000
uuuu uuuu
uuuu uuuu
ALRMCFG
PIC18F2XJ53 PIC18F4XJ53
0000 0000
uuuu uuuu
uuuu uuuu
ALRMRPT
PIC18F2XJ53 PIC18F4XJ53
0000 0000
uuuu uuuu
uuuu uuuu
ALRMVALH PIC18F2XJ53 PIC18F4XJ53
xxxx xxxx
uuuu uuuu
uuuu uuuu
ALRMVALL PIC18F2XJ53 PIC18F4XJ53
xxxx xxxx
uuuu uuuu
uuuu uuuu
ODCON1
PIC18F2XJ53 PIC18F4XJ53
---- 0000
---- uuuu
---- uuuu
ODCON2
PIC18F2XJ53 PIC18F4XJ53
---- --00
---- --uu
---- --uu
ODCON3
PIC18F2XJ53 PIC18F4XJ53
---- --00
---- --uu
---- --uu
RTCCFG
PIC18F2XJ53 PIC18F4XJ53
0-00 0000
u-uu uuuu
u-uu uuuu
RTCCAL
PIC18F2XJ53 PIC18F4XJ53
0000 0000
uuuu uuuu
uuuu uuuu
Legend:
Note 1:
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.
5: Not implemented for PIC18F2XJ53 devices.
6: Not implemented for “LF” devices.
DS39964B-page 76
Preliminary
 2010 Microchip Technology Inc.