PIC18F47J53 Datasheet, PDF (189/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
11.2.2 WRITE TO SLAVE PORT
When chip select is active and a write strobe occurs
(PMCSx = 1 and PMWR = 1), the data from PMD<7:0>
is captured into the lower PMDIN1L register. The
PMPIF and IBF flag bits are set when the write
ends.The timing for the control signals in Write mode is
displayed in Figure 11-3. The polarity of the control
signals are configurable.
11.2.3 READ FROM SLAVE PORT
When chip select is active and a read strobe occurs
(PMCSx = 1 and PMRD = 1), the data from the
PMDOUT1L register (PMDOUT1L<7:0>) is presented
on to PMD<7:0>. Figure 11-4 provides the timing for
the control signals in Read mode.
FIGURE 11-3:
PARALLEL SLAVE PORT WRITE WAVEFORMS
| Q4 | Q1 | Q2 | Q3 | Q4
PMCSx
PMWR
PMRD
PMD<7:0>
IBF
OBE
PMPIF
FIGURE 11-4:
PMCS1
PMWR
PMRD
PMD<7:0>
IBF
OBE
PMPIF
PARALLEL SLAVE PORT READ WAVEFORMS
| Q4 | Q1 | Q2 | Q3 | Q4
 2010 Microchip Technology Inc.
Preliminary
DS39964B-page 189