PIC18F47J53 Datasheet, PDF (80/586 Pages) Microchip Technology – 28/44-Pin, High-Performance USB Microcontrollers with nanoWatt XLP Technology

PIC18F47J53 FAMILY
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset,
Wake From Deep
Sleep
MCLR Resets
WDT Reset
RESET Instruction
Stack Resets
CM Resets
Wake-up via WDT
or Interrupt
RPOR5
RPOR4
RPOR3
RPOR2
RPOR1
RPOR0
Legend:
Note 1:
2:
3:
4:
5:
6:
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
PIC18F2XJ53 PIC18F4XJ53
---0 0000
---0 0000
---u uuuu
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
See Table 5-1 for Reset value for specific condition.
Not implemented for PIC18F2XJ53 devices.
Not implemented for “LF” devices.
DS39964B-page 80
Preliminary
 2010 Microchip Technology Inc.