MC9S12KG128 Datasheet, PDF (429/600 Pages) Freescale Semiconductor, Inc – Microcontrollers

Field
1
PAOVI
0
PAI
Chapter 13 Timer Module (TIM16B8CV1)
Table 13-17. PACTL Field Descriptions (continued)
Description
Pulse Accumulator Overflow Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAOVF is set.
Pulse Accumulator Input Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAIF is set.
PAMOD
0
0
1
1
PEDGE
0
1
0
1
Table 13-18. Pin Action
Pin Action
Falling edge
Rising edge
Div. by 64 clock enabled with pin high level
Div. by 64 clock enabled with pin low level
NOTE
If the timer is not active (TEN = 0 in TSCR), there is no divide-by-64
because the ÷64 clock is generated by the timer prescaler.
CLK1
0
0
1
1
Table 13-19. Timer Clock Selection
CLK0
0
1
0
1
Timer Clock
Use timer prescaler clock as timer counter clock
Use PACLK as input to timer counter clock
Use PACLK/256 as timer counter clock frequency
Use PACLK/65536 as timer counter clock frequency
For the description of PACLK please refer Figure 13-24.
If the pulse accumulator is disabled (PAEN = 0), the prescaler clock from the timer is always used as an
input clock to the timer counter. The change from one selected clock to the other happens immediately
after these bits are written.
MC9S12KG128 Data Sheet, Rev. 1.15
Freescale Semiconductor
429