MC9S12KG128 Datasheet, PDF (238/600 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 7 Analog-to-Digital Converter (ATD10B16CV1)
7.3.2.11 ATD Status Register 1 (ATDSTAT1)
This read-only register contains the Conversion Complete Flags CCF7 to CCF0.
Module Base + 0x000B
R
W
Reset
7
CCF7
0
6
CCF6
5
CCF5
4
CCF4
3
CCF3
2
CCF2
0
0
0
0
0
= Unimplemented or Reserved
Figure 7-13. ATD Status Register 1 (ATDSTAT1)
Read: Anytime
Write: Anytime, no effect
Table 7-21. ATDSTAT1 Field Descriptions
1
CCF1
0
0
CCF0
0
Field
Description
7–0
CCF[7:0]
Conversion Complete Flag x (x = 7, 6, 5, 4, 3, 2, 1, 0) — A conversion complete flag is set at the end of each
conversion in a conversion sequence. The flags are associated with the conversion position in a sequence (and
also the result register number). Therefore, CCF0 is set when the first conversion in a sequence is complete and
the result is available in result register ATDDR0; CCF1 is set when the second conversion in a sequence is
complete and the result is available in ATDDR1, and so forth. A flag CCFx (x = 7, 6, 5, 4, 3, 2, 1, 0) is cleared
when one of the following occurs:
A) Write to ATDCTL5 (a new conversion sequence is started)
B) If AFFC=0 and read of ATDSTAT1 followed by read of result register ATDDRx
C) If AFFC=1 and read of result register ATDDRx
0 Conversion number x not completed
1 Conversion number x has completed, result ready in ATDDRx
MC9S12KG128 Data Sheet, Rev. 1.15
238
Freescale Semiconductor