SAM7S256_14 Datasheet, PDF (563/775 Pages) ATMEL Corporation – ARM-based Flash MCU

Table 37-7. Power Consumption for Different Modes
Mode
Conditions
Consumption Unit
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 32 MHz ARM Core clock is 32 MHz.
(SAM7S64/321/32/161/16)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
19.4
mA
19.2
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 32 MHz ARM Core clock is 32 MHz.
(SAM7S512/256/128)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
20.6
mA
20.4
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 48 MHz ARM Core clock is 48 MHz.
(SAM7S64/321/32/161/16)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
27.8
mA
27.6
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 32 MHz ARM Core clock is 48 MHz.
(SAM7S512/256/128)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
29.5
mA
29.3
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
563