SAM7S256_14 Datasheet, PDF (558/775 Pages) ATMEL Corporation – ARM-based Flash MCU

37.2 DC Characteristics
The following characteristics are applicable to the operating temperature range: T_A = -40°C to 85°C unless otherwise
specified.
Table 37-2. DC Characteristics
Symbol Parameter
Conditions
Min
V_VDDCORE
V_VDDPLL
DC Supply Core
DC Supply PLL
V_VDDIO
DC Supply I/Os
1.65
1.65
3.0
1.65
V_VDDFLASH
V_IL
V_IH
V_OL
V_OH
I_LEAK
DC Supply Flash
Input Low-level Voltage
V_VDDIO from 3.0V to 3.6V
V_VDDIO from 1.65V to 1.95V
Input High-level Voltage
V_VDDIO from 3.0V to 3.6V
V_VDDIO from 1.65V to 1.95V
I_O = 8 mA, V_VDDIO from 3.0V to 3.6V
I_O = 0.3 mA, (CMOS) V_VDDIO from 3.0V to 3.6V
Output Low-level Voltage
I_O = 1.5 mA, V_VDDIO from 1.65V to 1.95V
I_O = 0.3 mA, (CMOS) V_VDDIO from 1.65V to 1.95V
I_O = 8 mA, V_VDDIO from 3.0V to 3.6V
I_O = 0.3 mA, (CMOS) V_VDDIO from 3.0V to 3.6V
Output High-level Voltage
I_O = 1.5 mA, V_VDDIO from 1.65V to 1.95V
I_O = 0.3 mA, V_VDDIO (CMOS) from 1.65V to 1.95V
Input Leakage Current
PA0-PA3, Pull-up resistors disabled
(Typ: T_A = 25°C, Max: T_A = 85°C)
Other PIOs, Pull-up resistors disabled
(Typ: T_A = 25°C, Max: T_A = 85°C)
PA17-PA20, V_VDDIO from 3.0V to 3.6V,
PAx connected to ground
3.0
-0.3
-0.3
2.0
0.6 x V_VDDIO
V_DDIO - 0.4
V_DDIO - 0.1
V_DDIO - 0.2
V_DDIO - 0.1
10
I_PULLUP
Input Pull-up Current
PA17-PA20, V_VDDIO from 1.65V to 1.95V,
PAx connected to ground
Other PIOs and NRST, V_VDDIO from 3.0V to 3.6V,
PAx connected to ground
2.46
143
Other PIOs and NRST, V_VDDIO from 1.65V to 1.95V,
PAx connected to ground
25
V_VDDIO from 3.0V to 3.6V,
135
I_PULLDOWN
Input Pull-down Current, ^{Pins connected to V}VDDIO
(TST, ERASE, JTAGSEL) _{VVDDIO from 1.65V to 1.95V,}
30
Pins connected to V_VDDIO
C_IN
Input Capacitance
48 or 64 LQFP Package
Typ
40
20
20.6
5.15
321
75
295
67
Max Units
1.95
V
1.95
V
3.6
V
1.95
V
3.6
V
0.8
V
0.45
V
5.5
V
5.5
V
0.4
V
0.1
V
0.2
V
0.1
V
V
V
V
V
400
nA
200
nA
60
µA
11.5 µA
600
µA
100
µA
550
µA
130
µA
13.9 pF
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
558