SAM7S256_14 Datasheet, PDF (438/775 Pages) ATMEL Corporation – ARM-based Flash MCU

• RXBUFF: Receive Buffer Full
0 = SSC_RCR or SSC_RNCR have a value other than 0.
1 = Both SSC_RCR and SSC_RNCR have a value of 0.
• CP0: Compare 0
0 = A compare 0 has not occurred since the last read of the Status Register.
1 = A compare 0 has occurred since the last read of the Status Register.
• CP1: Compare 1
0 = A compare 1 has not occurred since the last read of the Status Register.
1 = A compare 1 has occurred since the last read of the Status Register.
• TXSYN: Transmit Sync
0 = A Tx Sync has not occurred since the last read of the Status Register.
1 = A Tx Sync has occurred since the last read of the Status Register.
• RXSYN: Receive Sync
0 = An Rx Sync has not occurred since the last read of the Status Register.
1 = An Rx Sync has occurred since the last read of the Status Register.
• TXEN: Transmit Enable
0 = Transmit is disabled.
1 = Transmit is enabled.
• RXEN: Receive Enable
0 = Receive is disabled.
1 = Receive is enabled.
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
438