SAM7S256_14 Datasheet, PDF (542/775 Pages) ATMEL Corporation – ARM-based Flash MCU

36.5.4 Conversion Results
When a conversion is completed, the resulting 10-bit digital value is stored in the Channel Data Register
(ADC_CDR) of the current channel and in the ADC Last Converted Data Register (ADC_LCDR).
The channel EOC bit in the Status Register (ADC_SR) is set and the DRDY is set. In the case of a connected PDC
channel, DRDY rising triggers a data transfer request. In any case, either EOC and DRDY can trigger an interrupt.
Reading one of the ADC_CDR registers clears the corresponding EOC bit. Reading ADC_LCDR clears the DRDY
bit and the EOC bit corresponding to the last converted channel.
Figure 36-2. EOCx and DRDY Flag Behavior
Write the ADC_CR
with START = 1
Read the ADC_CDRx
Write the ADC_CR
with START = 1
Read the ADC_LCDR
CHx
(ADC_CHSR)
EOCx
(ADC_SR)
DRDY
(ADC_SR)
Conversion Time
Conversion Time
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
542