English
Language : 

SED1374 Datasheet, PDF (28/420 Pages) Epson Company – SED1374 Embedded Memory Color LCD Controller
Page 20
Epson Research and Development
Vancouver Design Center
Pin Names
Type
RD#
I
WAIT#
O
RESET#
I
Pin #
76
2
73
RESET#
Cell
State
Description
This pin has multiple functions.
CS
Input
• For SH-3/SH-4 mode, this pin inputs the read signal
(RD#).
• For MC68K #1, this pin must be tied to IO VDD.
• For MC68K #2, this pin inputs the bus size bit 1 (SIZ1).
• For Generic #1, this pin inputs the read command for the
lower data byte (RD0#).
• For Generic #2, this pin inputs the read command (RD#).
See “Host Bus Interface Pin Mapping” for summary.
This pin has multiple functions.
TS2
High
Impedance
• For SH-3 mode, this pin outputs the wait request signal
(WAIT#).
• For SH-4 mode, this pin outputs the device ready signal
(RDY#).
• For MC68K #1, this pin outputs the data transfer
acknowledge signal (DTACK#).
• For MC68K #2, this pin outputs the data transfer and
size acknowledge bit 1 (DSACK1#).
• For Generic #1, this pin outputs the wait signal (WAIT#).
• For Generic #2, this pin outputs the wait signal (WAIT#).
See “Host Bus Interface Pin Mapping” for summary.
CS
0
Active low input to set all internal registers to the default state
and to force all signals to their inactive states.
5.2.2 LCD Interface
Pin Name
FPDAT[7:0]
FPDAT[10:8]
FPDAT11
FPFRAME
Type
Pin #
Cell
30, 31, 32,
O 33, 34, 35, CN3
36, 37
O,
I/O
24, 25, 26 CN3
O,
I/O
23
CN3
O
39
CN3
RESET#
State
Description
0
Panel Data
Input
Input
0
These pins have multiple functions.
• Panel Data bits [10:8] for TFT/MD-TFD panels.
• General Purpose Input/Output pins GPIO[3:1].
These pins should be connected to IO VDD when unused.
See “LCD Interface Pin Mapping” for summary.
This pin has multiple functions.
• Panel Data bit 11 for TFT/MD-TFD panels.
• General Purpose Input/Output pin GPIO4.
• Inverse Video select pin.
This pin should be connected to IO VDD when unused. See
“LCD Interface Pin Mapping” for summary.
Frame Pulse
SED1374
X26A-A-001-02
Hardware Functional Specification
Issue Date: 99/04/29