|
SED1374 Datasheet, PDF (263/420 Pages) Epson Company – SED1374 Embedded Memory Color LCD Controller | |||
|
◁ |
EPSON Research and Development
Vancouver Design Center
Page 7
1 Introduction
This application note describes the hardware and software environment required to provide an
interface between the SED1374 Embedded Memory Color Graphics LCD Controller and the
Toshiba MIPS TX3912 Processor.
For further information on the SED1374, refer to the SED1374 Hardware Functional Specification,
document number X26A-A-001-xx.
For further information on the TX3912, contact Toshiba or refer to the Toshiba website under
semiconductors at http://www.toshiba.com/taec/nonflash/indexproducts.html.
For further information on the ITE IT8368E, refer to the IT8368E PC Card / GPIO Buffer Chip
Specification.
1.1 General Description
The Toshiba MIPS TX3912 processor supports up to two PC Card (PCMCIA) slots. It is through
this host bus interface that the SED1374 connects to the TX3912 processor.
The SED1374 can be successfully interfaced using one of two configurations:
⢠Direct connection to TX3912 (see Section 2, âDirect Connection to the Toshiba TX3912â on
page 8).
⢠System design using one ITE IT8368E PC Card/GPIO buffer chip (see Section 3, âSystem
Design Using the ITE IT8368E PC Card Bufferâ on page 10).
Interfacing to the Toshiba MIPS TX3912 Processor
Issue Date: 98/11/09
SED1374
X26A-G-004-01
|
▷ |