|
SM320F2812-HT Datasheet, PDF (65/155 Pages) Texas Instruments – Digital Signal Processor | |||
|
◁ |
SM320F2812-HT
www.ti.com
SGUS062A â JUNE 2009 â REVISED APRIL 2010
4.4 Enhanced Controller Area Network (eCAN) Module
The CAN module has the following features:
⢠Fully compliant with CAN protocol, version 2.0B
⢠Supports data rates up to 1 Mbps
⢠Thirty-two mailboxes, each with the following properties:
â Configurable as receive or transmit
â Configurable with standard or extended identifier
â Has a programmable receive mask
â Supports data and remote frame
â Composed of 0 to 8 bytes of data
â Uses a 32-bit time stamp on receive and transmit message
â Protects against reception of new message
â Holds the dynamically programmable priority of transmit message
â Employs a programmable interrupt scheme with two interrupt levels
â Employs a programmable alarm on transmission or reception time-out
⢠Low-power mode
⢠Programmable wake-up on bus activity
⢠Automatic reply to a remote request message
⢠Automatic retransmission of a frame in case of loss of arbitration or error
⢠32-bit local network time counter synchronized by a specific message (communication in conjunction
with mailbox 16)
⢠Self-test mode
â Operates in a loopback mode receiving its own message. A dummy acknowledge is provided,
thereby eliminating the need for another node to provide the acknowledge bit.
NOTE
For a SYSCLKOUT of 150 MHz, the smallest bit rate possible is 23.4 kbps.
The 28x CAN has passed the conformance test per ISO/DIS 16845. Contact TI for further details.
Copyright © 2009â2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SM320F2812-HT
Peripherals
65
|
▷ |