N25Q032A13E1241F Datasheet, PDF (77/153 Pages) Micron Technology – 32-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase, XiP enabled, serial flash memory with 108 MHz SPI bus interface

N25Q032 - 3 V
Instructions
Table 16. Suspend Parameters
Parameter
Condition
Typ Max Unit
Note
Erase to Suspend
Sector Erase or Erase Resume to
Erase Suspend
700
µs Timing not internally controlled
Program to
Suspend
SSErase to
Suspend
Suspend Latency
Program Resume to Program
Suspend
5
Sub Sector Erase or Sub Sector
Erase Resume to Erase Suspend
50
Program
7
Sub Sector Erase
15
Erase
15
µs Timing not internally controlled
µs Timing not internally controlled
µs Any Read instruction accepted
µs Any Read instruction accepted
Any instruction accepted but
µs SE, SSE, BE, WRSR,
WRNVCR, POTP
Note:
As shown here, the device can be in only one state at a time, such as Standby or Program.
Table 17. Operations Allowed / Disallowed During Device States
Device States and Sector (Same/Other) in Which Operation is Allowed/Disallowed (Yes/No)
Operation
Standby
State
Program State
Erase State
(SE/SSE)
Subsector
Erase
Suspended
State
Program
Suspended
State
Erase
Suspended
State
Sector
Sector
Sector
Sector
Sector
Sector
Same Other Same Other Same Other Same Other Same Other Same Other
All Reads
except RDSR / Yes Yes
RFSR
Array Program:
PP / DIFP /
QIFP / DIEFP /
Yes
Yes
QIEFP
Sector Erase Yes Yes
Sub-Sector
Erase
Yes Yes
WRLR / POTP /
BE / WRSR /
Yes
WRNVCR
WRVCR /
WRVECR
Yes
RDSR / RFSR
Yes
Program /
Erase Suspend
No
No No
No No
No No
No No
No
No
Yes
Yes
No No Yes⁽¹⁾ Yes Yes Yes Yes⁽¹⁾ Yes
No No No
No
No No No Yes
No No No
No
No No No No
No No No
No
No No No No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
1. The Read operation is accepted but the data output is not guaranteed until the program or erase has completed.
77/153
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2010 Micron Technology, Inc. All rights reserved.