English
Language : 

N25Q032A13E1241F Datasheet, PDF (3/153 Pages) Micron Technology – 32-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase, XiP enabled, serial flash memory with 108 MHz SPI bus interface
M25Q032 - 3 V
Contents
5.2.2 Dual Command Fast reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.2.3 Page programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.2.4 Subsector Erase, Sector Erase and Bulk Erase . . . . . . . . . . . . . . . . . . 27
5.2.5 Polling during a Write, Program or Erase cycle . . . . . . . . . . . . . . . . . . . 27
5.2.6 Read and Modify registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.2.7 Active Power and Standby Power modes . . . . . . . . . . . . . . . . . . . . . . . 27
5.2.8 HOLD (or Reset) condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.3 Quad SPI (QIO-SPI)Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.1 Multiple I/O Read Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.2 Quad Command Fast reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.3 QUAD Command Page programming . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.4 Subsector Erase, Sector Erase and Bulk Erase . . . . . . . . . . . . . . . . . . 29
5.3.5 Polling during a Write, Program or Erase cycle . . . . . . . . . . . . . . . . . . . 29
5.3.6 Read and Modify registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.3.7 Active Power and Standby Power modes . . . . . . . . . . . . . . . . . . . . . . . 30
5.3.8 HOLD (or Reset) condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.3.9 VPP pin Enhanced Supply Voltage feature . . . . . . . . . . . . . . . . . . . . . . 30
6
Volatile and Non Volatile Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.1 Legacy SPI Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1.1 WIP bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1.2 WEL bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1.3 Block Protect bits (BP2, BP1, BP0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1.4 TB bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.1.5 SRWD bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.2 Non Volatile Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.2.1 Dummy clock cycles NV configuration bits (NVCR bits from 15 to 12) . 36
6.2.2 XIP NV configuration bits (NVCR bits from 11 to 9) . . . . . . . . . . . . . . . . 37
6.2.3 Output Driver Strength NV configuration bits (NVCR bits from 8 to 6) . . 37
6.2.4 Hold (Reset) disable NV configuration bit (NVCR bit 4) . . . . . . . . . . . . 37
6.2.5 Quad Input NV configuration bit (NVCR bit 3) . . . . . . . . . . . . . . . . . . . . 37
6.2.6 Dual Input NV configuration bit (NVCR bit 2) . . . . . . . . . . . . . . . . . . . . . 37
6.3 Volatile Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6.3.1 Dummy clock cycle: VCR bits 7:4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.3.2 XIP Volatile Configuration bits (VCR bit 3) . . . . . . . . . . . . . . . . . . . . . . . 39
6.3.3 Wrap: VCR bits 1:0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.4 Volatile Enhanced Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . 39
3/153
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2010 Micron Technology, Inc. All rights reserved.