PIC18F2331 Datasheet, PDF (322/396 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High Performance PWM and A/D

PIC18F2331/2431/4331/4431
RLNCF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Rotate Left f (no carry)
[ label ] RLNCF f [,d [,a]]
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f<n>) → dest<n+1>,
(f<7>) → dest<0>
N, Z
0100 01da ffff ffff
The contents of register ‘f’ are
rotated one bit to the left. If ‘d’ is 0,
the result is placed in W. If ‘d’ is 1,
the result is stored back in register
‘f’ (default). If ‘a’ is 0, the Access
Bank will be selected, overriding
the BSR value. If ‘a’ is 1, then the
bank will be selected as per the
BSR value (default).
register f
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
Q2
Decode
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
RLNCF REG
Before Instruction
REG = 1010 1011
After Instruction
REG = 0101 0111
RRCF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Rotate Right f through Carry
[ label ] RRCF f [,d [,a]]
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f<n>) → dest<n-1>,
(f<0>) → C,
(C) → dest<7>
C, N, Z
0011 00da ffff ffff
The contents of register ‘f’ are
rotated one bit to the right through
the Carry Flag. If ‘d’ is 0, the result
is placed in W. If ‘d’ is 1, the result
is placed back in register ‘f’
(default). If ‘a’ is 0, the Access
Bank will be selected, overriding
the BSR value. If ‘a’ is 1, then the
bank will be selected as per the
BSR value (default).
C
register f
Words:
1
Cycles:
1
Q Cycle Activity:
Q1
Q2
Decode
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
RRCF REG, W
Before Instruction
REG
C
= 1110 0110
=0
After Instruction
REG = 1110 0110
W
= 0111 0011
C
=0
DS39616B-page 320
Preliminary
 2003 Microchip Technology Inc.